From 7be37649b31f102de19cddb49b9e53f70202f2cd Mon Sep 17 00:00:00 2001
From: Eli Schwartz <eschwartz@archlinux.org>
Date: Sun, 28 Oct 2018 16:52:30 -0400
Subject: Initial upload of split zfs-utils 0.7.11

Split out into separate package as there's no need to make binary zfs
module packages depend on a dkms split package just to acquire the
utils.
---
 zfs.initcpio.install | 108 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 108 insertions(+)
 create mode 100644 zfs.initcpio.install

(limited to 'zfs.initcpio.install')

diff --git a/zfs.initcpio.install b/zfs.initcpio.install
new file mode 100644
index 0000000..3ab0f52
--- /dev/null
+++ b/zfs.initcpio.install
@@ -0,0 +1,108 @@
+#!/bin/bash
+
+build() {
+    map add_module \
+        zavl \
+        znvpair \
+        zunicode \
+        zcommon \
+        zfs \
+        zpios \
+        spl \
+        splat
+
+    map add_binary \
+        arcstat.py \
+        dbufstat.py \
+        fsck.zfs \
+        mount.zfs \
+        seq \
+        zdb \
+        zed \
+        zfs \
+        zhack \
+        zinject \
+        zpios \
+        zpool \
+        zstreamdump \
+        ztest \
+        splat \
+        /lib/udev/vdev_id \
+        /lib/udev/zvol_id \
+        findmnt
+
+    map add_file \
+        /lib/udev/rules.d/60-zvol.rules \
+        /lib/udev/rules.d/69-vdev.rules \
+        /lib/udev/rules.d/90-zfs.rules \
+        /lib/libgcc_s.so.1
+
+    map add_dir \
+        /etc/zfs/zed.d
+
+    add_runscript
+
+    # allow mount(8) to "autodetect" ZFS
+    echo 'zfs' >>"${BUILDROOT}/etc/filesystems"
+
+    [[ -f /etc/zfs/zpool.cache ]] && add_file "/etc/zfs/zpool.cache"
+    [[ -f /etc/modprobe.d/zfs.conf ]] && add_file "/etc/modprobe.d/zfs.conf"
+}
+
+help() {
+    cat<<HELPEOF
+This hook allows you to use ZFS as your root filesystem.
+
+Command Line Setup:
+
+    You can append the following arguments to your kernel parameters list. See
+    https://wiki.archlinux.org/index.php/Kernel_parameters for more information.
+
+    To use ZFS as your boot filesystem:
+
+        zfs=bootfs or zfs=auto or root=zfs
+
+    To use a pool or dataset:
+
+        zfs=<pool/dataset>
+
+    To force importing of a ZFS pool:
+
+        zfs_force=1
+
+        If set to 1, this will use "zpool import -f" when attempting to import
+        pools.
+
+    To change the seconds of time to wait for ZFS devices to show up at boot:
+
+        zfs_wait=30
+
+    To search for devices in a directory other than "/dev":
+
+        zfs_import_dir=/dev/disk/by-uuid
+            or
+        zfs_import_dir=/dev/disk/by-partuuid
+            or
+        zfs_import_dir=/dev/disk/by-path
+            etc.
+
+    Following initcpio convention, the 'rw' option must be specified to load the
+    pool as read/write. Pools are loaded as read only by default.
+
+Examples:
+
+    To use bootfs on your pool, use
+
+        zfs=bootfs rw
+
+    This will setup your root using tank/root zfs pool.
+
+        zfs=tank/root rw
+
+If you want to set properties for zfs-on-linux module, you should add them to
+/etc/modprobe.d/zfs.conf and then rebuild initcpio.
+
+HELPEOF
+}
+
+# vim: set ts=4 sw=4 ft=sh et:
-- 
cgit v1.2.1