1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
|
; Declare constants for the multiboot header.
MAGIC equ 0xE85250D6 ; multiboot2 magic
ARCH equ 0 ; protected mode i386
; Declare a multiboot header that marks the program as a kernel. These are magic
; values that are documented in the multiboot standard. The bootloader will
; search for this signature in the first 8 KiB of the kernel file, aligned at a
; 32-bit boundary. The signature is in its own section so the header can be
; forced to be within the first 8 KiB of the kernel file.
section .multiboot
header_start:
dd MAGIC
dd ARCH
dd header_end - header_start ; header length
dd 0x100000000 - (MAGIC + ARCH + (header_end - header_start))
; optional multiboot tags here
; required end tag (u16, u16, u32) = (0, 0, 8)
dw 0 ; type
dw 0 ; flags
dd 8 ; size
header_end:
; The multiboot standard does not define the value of the stack pointer register
; (esp) and it is up to the kernel to provide a stack. This allocates room for a
; small stack by creating a symbol at the bottom of it, then allocating 16384
; bytes for it, and finally creating a symbol at the top. The stack grows
; downwards on x86. The stack is in its own section so it can be marked nobits,
; which means the kernel file is smaller because it does not contain an
; uninitialized stack. The stack on x86 must be 16-byte aligned according to the
; System V ABI standard and de-facto extensions. The compiler will assume the
; stack is properly aligned and failure to align the stack will result in
; undefined behavior.
section .bss
align 16
stack_bottom:
resb 16384 ; 16 KiB
stack_top:
; The linker script specifies _start as the entry point to the kernel and the
; bootloader will jump to this position once the kernel has been loaded. It
; doesn't make sense to return from this function as the bootloader is gone.
; Declare _start as a function symbol with the given symbol size.
section .text
global _start:function (_start.end - _start)
_start:
; The bootloader has loaded us into 32-bit protected mode on a x86
; machine. Interrupts are disabled. Paging is disabled. The processor
; state is as defined in the multiboot standard. The kernel has full
; control of the CPU. The kernel can only make use of hardware features
; and any code it provides as part of itself. There's no printf
; function, unless the kernel provides its own <stdio.h> header and a
; printf implementation. There are no security restrictions, no
; safeguards, no debugging mechanisms, only what the kernel provides
; itself. It has absolute and complete power over the
; machine.
; To set up a stack, we set the esp register to point to the top of our
; stack (as it grows downwards on x86 systems). This is necessarily done
; in assembly as languages such as C cannot function without a stack.
mov esp, stack_top
push ebx
push eax
; This is a good place to initialize crucial processor state before the
; high-level kernel is entered. It's best to minimize the early
; environment where crucial features are offline. Note that the
; processor is not fully initialized yet: Features such as floating
; point instructions and instruction set extensions are not initialized
; yet. The GDT should be loaded here. Paging should be enabled here.
; C++ features such as global constructors and exceptions will require
; runtime support to work as well.
; Enter the high-level kernel. The ABI requires the stack is 16-byte
; aligned at the time of the call instruction (which afterwards pushes
; the return pointer of size 4 bytes). The stack was originally 16-byte
; aligned above and we've since pushed a multiple of 16 bytes to the
; stack since (pushed 0 bytes so far) and the alignment is thus
; preserved and the call is well defined.
; note, that if you are building on Windows, C functions may have "_" prefix in assembly: _kernel_main
extern kernel_main
call kernel_main
; If the system has nothing more to do, put the computer into an
; infinite loop. To do that:
; 1) Disable interrupts with cli (clear interrupt enable in eflags).
; They are already disabled by the bootloader, so this is not needed.
; Mind that you might later enable interrupts and return from
; kernel_main (which is sort of nonsensical to do).
; 2) Wait for the next interrupt to arrive with hlt (halt instruction).
; Since they are disabled, this will lock up the computer.
; 3) Jump to the hlt instruction if it ever wakes up due to a
; non-maskable interrupt occurring or due to system management mode.
cli
.hang: hlt
jmp .hang
.end:
|
