Add CMakePresets.json

- add clang-tidy to debug configuration
- add valgrind target: test_memcheck
- add coverage target: test_coverage
- bitbucket pipelines: store test results in junit format for test
  reporting

1 files changed, 720 insertions, 0 deletions

diff --git a/cmake/CodeCoverage.cmake b/cmake/CodeCoverage.cmake
new file mode 100644
index 00000000..5a230911
--- /dev/null
+++ b/cmake/CodeCoverage.cmake
@@ -0,0 +1,720 @@
+# Copyright (c) 2012 - 2017, Lars Bilke
+# All rights reserved.
+# upstream url: https://github.com/bilke/cmake-modules
+#
+# Redistribution and use in source and binary forms, with or without modification,
+# are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice, this
+#    list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without
+#    specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# CHANGES:
+#
+# 2012-01-31, Lars Bilke
+# - Enable Code Coverage
+#
+# 2013-09-17, Joakim Söderberg
+# - Added support for Clang.
+# - Some additional usage instructions.
+#
+# 2016-02-03, Lars Bilke
+# - Refactored functions to use named parameters
+#
+# 2017-06-02, Lars Bilke
+# - Merged with modified version from github.com/ufz/ogs
+#
+# 2019-05-06, Anatolii Kurotych
+# - Remove unnecessary --coverage flag
+#
+# 2019-12-13, FeRD (Frank Dana)
+# - Deprecate COVERAGE_LCOVR_EXCLUDES and COVERAGE_GCOVR_EXCLUDES lists in favor
+#   of tool-agnostic COVERAGE_EXCLUDES variable, or EXCLUDE setup arguments.
+# - CMake 3.4+: All excludes can be specified relative to BASE_DIRECTORY
+# - All setup functions: accept BASE_DIRECTORY, EXCLUDE list
+# - Set lcov basedir with -b argument
+# - Add automatic --demangle-cpp in lcovr, if 'c++filt' is available (can be
+#   overridden with NO_DEMANGLE option in setup_target_for_coverage_lcovr().)
+# - Delete output dir, .info file on 'make clean'
+# - Remove Python detection, since version mismatches will break gcovr
+# - Minor cleanup (lowercase function names, update examples...)
+#
+# 2019-12-19, FeRD (Frank Dana)
+# - Rename Lcov outputs, make filtered file canonical, fix cleanup for targets
+#
+# 2020-01-19, Bob Apthorpe
+# - Added gfortran support
+#
+# 2020-02-17, FeRD (Frank Dana)
+# - Make all add_custom_target()s VERBATIM to auto-escape wildcard characters
+#   in EXCLUDEs, and remove manual escaping from gcovr targets
+#
+# 2021-01-19, Robin Mueller
+# - Add CODE_COVERAGE_VERBOSE option which will allow to print out commands which are run
+# - Added the option for users to set the GCOVR_ADDITIONAL_ARGS variable to supply additional
+#   flags to the gcovr command
+#
+# 2020-05-04, Mihchael Davis
+#     - Add -fprofile-abs-path to make gcno files contain absolute paths
+#     - Fix BASE_DIRECTORY not working when defined
+#     - Change BYPRODUCT from folder to index.html to stop ninja from complaining about double defines
+#
+# 2021-05-10, Martin Stump
+#     - Check if the generator is multi-config before warning about non-Debug builds
+#
+# 2022-02-22, Marko Wehle
+#     - Change gcovr output from -o <filename> for --xml <filename> and --html <filename> output respectively.
+#       This will allow for Multiple Output Formats at the same time by making use of GCOVR_ADDITIONAL_ARGS, e.g. GCOVR_ADDITIONAL_ARGS "--txt".
+#
+# USAGE:
+#
+# 1. Copy this file into your cmake modules path.
+#
+# 2. Add the following line to your CMakeLists.txt (best inside an if-condition
+#    using a CMake option() to enable it just optionally):
+#      include(CodeCoverage)
+#
+# 3. Append necessary compiler flags for all supported source files:
+#      append_coverage_compiler_flags()
+#    Or for specific target:
+#      append_coverage_compiler_flags_to_target(YOUR_TARGET_NAME)
+#
+# 3.a (OPTIONAL) Set appropriate optimization flags, e.g. -O0, -O1 or -Og
+#
+# 4. If you need to exclude additional directories from the report, specify them
+#    using full paths in the COVERAGE_EXCLUDES variable before calling
+#    setup_target_for_coverage_*().
+#    Example:
+#      set(COVERAGE_EXCLUDES
+#          '${PROJECT_SOURCE_DIR}/src/dir1/*'
+#          '/path/to/my/src/dir2/*')
+#    Or, use the EXCLUDE argument to setup_target_for_coverage_*().
+#    Example:
+#      setup_target_for_coverage_lcov(
+#          NAME coverage
+#          EXECUTABLE testrunner
+#          EXCLUDE "${PROJECT_SOURCE_DIR}/src/dir1/*" "/path/to/my/src/dir2/*")
+#
+# 4.a NOTE: With CMake 3.4+, COVERAGE_EXCLUDES or EXCLUDE can also be set
+#     relative to the BASE_DIRECTORY (default: PROJECT_SOURCE_DIR)
+#     Example:
+#       set(COVERAGE_EXCLUDES "dir1/*")
+#       setup_target_for_coverage_gcovr_html(
+#           NAME coverage
+#           EXECUTABLE testrunner
+#           BASE_DIRECTORY "${PROJECT_SOURCE_DIR}/src"
+#           EXCLUDE "dir2/*")
+#
+# 5. Use the functions described below to create a custom make target which
+#    runs your test executable and produces a code coverage report.
+#
+# 6. Build a Debug build:
+#      cmake -DCMAKE_BUILD_TYPE=Debug ..
+#      make
+#      make my_coverage_target
+#
+
+include(CMakeParseArguments)
+
+option(CODE_COVERAGE_VERBOSE "Verbose information" FALSE)
+
+# Check prereqs
+find_program( GCOV_PATH gcov )
+find_program( LCOV_PATH  NAMES lcov lcov.bat lcov.exe lcov.perl)
+find_program( FASTCOV_PATH NAMES fastcov fastcov.py )
+find_program( GENHTML_PATH NAMES genhtml genhtml.perl genhtml.bat )
+find_program( GCOVR_PATH gcovr PATHS ${CMAKE_SOURCE_DIR}/scripts/test)
+find_program( CPPFILT_PATH NAMES c++filt )
+
+if(NOT GCOV_PATH)
+    message(FATAL_ERROR "gcov not found! Aborting...")
+endif() # NOT GCOV_PATH
+
+get_property(LANGUAGES GLOBAL PROPERTY ENABLED_LANGUAGES)
+list(GET LANGUAGES 0 LANG)
+
+if("${CMAKE_${LANG}_COMPILER_ID}" MATCHES "(Apple)?[Cc]lang")
+    if("${CMAKE_${LANG}_COMPILER_VERSION}" VERSION_LESS 3)
+        message(FATAL_ERROR "Clang version must be 3.0.0 or greater! Aborting...")
+    endif()
+elseif(NOT CMAKE_COMPILER_IS_GNUCXX)
+    if("${CMAKE_Fortran_COMPILER_ID}" MATCHES "[Ff]lang")
+        # Do nothing; exit conditional without error if true
+    elseif("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
+        # Do nothing; exit conditional without error if true
+    else()
+        message(FATAL_ERROR "Compiler is not GNU gcc! Aborting...")
+    endif()
+endif()
+
+set(COVERAGE_COMPILER_FLAGS "-g -fprofile-arcs -ftest-coverage"
+    CACHE INTERNAL "")
+if(CMAKE_CXX_COMPILER_ID MATCHES "(GNU|Clang)")
+    include(CheckCXXCompilerFlag)
+    check_cxx_compiler_flag(-fprofile-abs-path HAVE_fprofile_abs_path)
+    if(HAVE_fprofile_abs_path)
+        set(COVERAGE_COMPILER_FLAGS "${COVERAGE_COMPILER_FLAGS} -fprofile-abs-path")
+    endif()
+endif()
+
+set(CMAKE_Fortran_FLAGS_COVERAGE
+    ${COVERAGE_COMPILER_FLAGS}
+    CACHE STRING "Flags used by the Fortran compiler during coverage builds."
+    FORCE )
+set(CMAKE_CXX_FLAGS_COVERAGE
+    ${COVERAGE_COMPILER_FLAGS}
+    CACHE STRING "Flags used by the C++ compiler during coverage builds."
+    FORCE )
+set(CMAKE_C_FLAGS_COVERAGE
+    ${COVERAGE_COMPILER_FLAGS}
+    CACHE STRING "Flags used by the C compiler during coverage builds."
+    FORCE )
+set(CMAKE_EXE_LINKER_FLAGS_COVERAGE
+    ""
+    CACHE STRING "Flags used for linking binaries during coverage builds."
+    FORCE )
+set(CMAKE_SHARED_LINKER_FLAGS_COVERAGE
+    ""
+    CACHE STRING "Flags used by the shared libraries linker during coverage builds."
+    FORCE )
+mark_as_advanced(
+    CMAKE_Fortran_FLAGS_COVERAGE
+    CMAKE_CXX_FLAGS_COVERAGE
+    CMAKE_C_FLAGS_COVERAGE
+    CMAKE_EXE_LINKER_FLAGS_COVERAGE
+    CMAKE_SHARED_LINKER_FLAGS_COVERAGE )
+
+get_property(GENERATOR_IS_MULTI_CONFIG GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
+if(NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR GENERATOR_IS_MULTI_CONFIG))
+    message(WARNING "Code coverage results with an optimised (non-Debug) build may be misleading")
+endif() # NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR GENERATOR_IS_MULTI_CONFIG)
+
+if(CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_Fortran_COMPILER_ID STREQUAL "GNU")
+    link_libraries(gcov)
+endif()
+
+# Defines a target for running and collection code coverage information
+# Builds dependencies, runs the given executable and outputs reports.
+# NOTE! The executable should always have a ZERO as exit code otherwise
+# the coverage generation will not complete.
+#
+# setup_target_for_coverage_lcov(
+#     NAME testrunner_coverage                    # New target name
+#     EXECUTABLE testrunner -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
+#     DEPENDENCIES testrunner                     # Dependencies to build first
+#     BASE_DIRECTORY "../"                        # Base directory for report
+#                                                 #  (defaults to PROJECT_SOURCE_DIR)
+#     EXCLUDE "src/dir1/*" "src/dir2/*"           # Patterns to exclude (can be relative
+#                                                 #  to BASE_DIRECTORY, with CMake 3.4+)
+#     NO_DEMANGLE                                 # Don't demangle C++ symbols
+#                                                 #  even if c++filt is found
+# )
+function(setup_target_for_coverage_lcov)
+
+    set(options NO_DEMANGLE)
+    set(oneValueArgs BASE_DIRECTORY NAME)
+    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES LCOV_ARGS GENHTML_ARGS)
+    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+    if(NOT LCOV_PATH)
+        message(FATAL_ERROR "lcov not found! Aborting...")
+    endif() # NOT LCOV_PATH
+
+    if(NOT GENHTML_PATH)
+        message(FATAL_ERROR "genhtml not found! Aborting...")
+    endif() # NOT GENHTML_PATH
+
+    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
+    if(DEFINED Coverage_BASE_DIRECTORY)
+        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
+    else()
+        set(BASEDIR ${PROJECT_SOURCE_DIR})
+    endif()
+
+    # Collect excludes (CMake 3.4+: Also compute absolute paths)
+    set(LCOV_EXCLUDES "")
+    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_LCOV_EXCLUDES})
+        if(CMAKE_VERSION VERSION_GREATER 3.4)
+            get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
+        endif()
+        list(APPEND LCOV_EXCLUDES "${EXCLUDE}")
+    endforeach()
+    list(REMOVE_DUPLICATES LCOV_EXCLUDES)
+
+    # Conditional arguments
+    if(CPPFILT_PATH AND NOT ${Coverage_NO_DEMANGLE})
+      set(GENHTML_EXTRA_ARGS "--demangle-cpp")
+    endif()
+     
+    # Setting up commands which will be run to generate coverage data.
+    # Cleanup lcov
+    set(LCOV_CLEAN_CMD 
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -directory . 
+        -b ${BASEDIR} --zerocounters
+    )
+    # Create baseline to make sure untouched files show up in the report
+    set(LCOV_BASELINE_CMD 
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -c -i -d . -b 
+        ${BASEDIR} -o ${Coverage_NAME}.base
+    )
+    # Run tests
+    set(LCOV_EXEC_TESTS_CMD 
+        ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
+    )    
+    # Capturing lcov counters and generating report
+    set(LCOV_CAPTURE_CMD 
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} --directory . -b 
+        ${BASEDIR} --capture --output-file ${Coverage_NAME}.capture
+    )
+    # add baseline counters
+    set(LCOV_BASELINE_COUNT_CMD
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -a ${Coverage_NAME}.base 
+        -a ${Coverage_NAME}.capture --output-file ${Coverage_NAME}.total
+    ) 
+    # filter collected data to final coverage report
+    set(LCOV_FILTER_CMD 
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} --remove 
+        ${Coverage_NAME}.total ${LCOV_EXCLUDES} --output-file ${Coverage_NAME}.info
+    )    
+    # Generate HTML output
+    set(LCOV_GEN_HTML_CMD
+        ${GENHTML_PATH} ${GENHTML_EXTRA_ARGS} ${Coverage_GENHTML_ARGS} -o 
+        ${Coverage_NAME} ${Coverage_NAME}.info
+    )
+    
+
+    if(CODE_COVERAGE_VERBOSE)
+        message(STATUS "Executed command report")
+        message(STATUS "Command to clean up lcov: ")
+        string(REPLACE ";" " " LCOV_CLEAN_CMD_SPACED "${LCOV_CLEAN_CMD}")
+        message(STATUS "${LCOV_CLEAN_CMD_SPACED}")
+
+        message(STATUS "Command to create baseline: ")
+        string(REPLACE ";" " " LCOV_BASELINE_CMD_SPACED "${LCOV_BASELINE_CMD}")
+        message(STATUS "${LCOV_BASELINE_CMD_SPACED}")
+
+        message(STATUS "Command to run the tests: ")
+        string(REPLACE ";" " " LCOV_EXEC_TESTS_CMD_SPACED "${LCOV_EXEC_TESTS_CMD}")
+        message(STATUS "${LCOV_EXEC_TESTS_CMD_SPACED}")
+
+        message(STATUS "Command to capture counters and generate report: ")
+        string(REPLACE ";" " " LCOV_CAPTURE_CMD_SPACED "${LCOV_CAPTURE_CMD}")
+        message(STATUS "${LCOV_CAPTURE_CMD_SPACED}")
+
+        message(STATUS "Command to add baseline counters: ")
+        string(REPLACE ";" " " LCOV_BASELINE_COUNT_CMD_SPACED "${LCOV_BASELINE_COUNT_CMD}")
+        message(STATUS "${LCOV_BASELINE_COUNT_CMD_SPACED}")
+
+        message(STATUS "Command to filter collected data: ")
+        string(REPLACE ";" " " LCOV_FILTER_CMD_SPACED "${LCOV_FILTER_CMD}")
+        message(STATUS "${LCOV_FILTER_CMD_SPACED}")
+
+        message(STATUS "Command to generate lcov HTML output: ")
+        string(REPLACE ";" " " LCOV_GEN_HTML_CMD_SPACED "${LCOV_GEN_HTML_CMD}")
+        message(STATUS "${LCOV_GEN_HTML_CMD_SPACED}")
+    endif()
+
+    # Setup target
+    add_custom_target(${Coverage_NAME}
+        COMMAND ${LCOV_CLEAN_CMD}
+        COMMAND ${LCOV_BASELINE_CMD} 
+        COMMAND ${LCOV_EXEC_TESTS_CMD}
+        COMMAND ${LCOV_CAPTURE_CMD}
+        COMMAND ${LCOV_BASELINE_COUNT_CMD}
+        COMMAND ${LCOV_FILTER_CMD} 
+        COMMAND ${LCOV_GEN_HTML_CMD}
+
+        # Set output files as GENERATED (will be removed on 'make clean')
+        BYPRODUCTS
+            ${Coverage_NAME}.base
+            ${Coverage_NAME}.capture
+            ${Coverage_NAME}.total
+            ${Coverage_NAME}.info
+            ${Coverage_NAME}/index.html
+        WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+        DEPENDS ${Coverage_DEPENDENCIES}
+        VERBATIM # Protect arguments to commands
+        COMMENT "Resetting code coverage counters to zero.\nProcessing code coverage counters and generating report."
+    )
+
+    # Show where to find the lcov info report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ;
+        COMMENT "Lcov code coverage info report saved in ${Coverage_NAME}.info."
+    )
+
+    # Show info where to find the report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ;
+        COMMENT "Open ./${Coverage_NAME}/index.html in your browser to view the coverage report."
+    )
+
+endfunction() # setup_target_for_coverage_lcov
+
+# Defines a target for running and collection code coverage information
+# Builds dependencies, runs the given executable and outputs reports.
+# NOTE! The executable should always have a ZERO as exit code otherwise
+# the coverage generation will not complete.
+#
+# setup_target_for_coverage_gcovr_xml(
+#     NAME ctest_coverage                    # New target name
+#     EXECUTABLE ctest -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
+#     DEPENDENCIES executable_target         # Dependencies to build first
+#     BASE_DIRECTORY "../"                   # Base directory for report
+#                                            #  (defaults to PROJECT_SOURCE_DIR)
+#     EXCLUDE "src/dir1/*" "src/dir2/*"      # Patterns to exclude (can be relative
+#                                            #  to BASE_DIRECTORY, with CMake 3.4+)
+# )
+# The user can set the variable GCOVR_ADDITIONAL_ARGS to supply additional flags to the
+# GCVOR command.
+function(setup_target_for_coverage_gcovr_xml)
+
+    set(options NONE)
+    set(oneValueArgs BASE_DIRECTORY NAME)
+    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES)
+    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+    if(NOT GCOVR_PATH)
+        message(FATAL_ERROR "gcovr not found! Aborting...")
+    endif() # NOT GCOVR_PATH
+
+    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
+    if(DEFINED Coverage_BASE_DIRECTORY)
+        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
+    else()
+        set(BASEDIR ${PROJECT_SOURCE_DIR})
+    endif()
+
+    # Collect excludes (CMake 3.4+: Also compute absolute paths)
+    set(GCOVR_EXCLUDES "")
+    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_GCOVR_EXCLUDES})
+        if(CMAKE_VERSION VERSION_GREATER 3.4)
+            get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
+        endif()
+        list(APPEND GCOVR_EXCLUDES "${EXCLUDE}")
+    endforeach()
+    list(REMOVE_DUPLICATES GCOVR_EXCLUDES)
+
+    # Combine excludes to several -e arguments
+    set(GCOVR_EXCLUDE_ARGS "")
+    foreach(EXCLUDE ${GCOVR_EXCLUDES})
+        list(APPEND GCOVR_EXCLUDE_ARGS "-e")
+        list(APPEND GCOVR_EXCLUDE_ARGS "${EXCLUDE}")
+    endforeach()
+    
+    # Set up commands which will be run to generate coverage data
+    # Run tests
+    set(GCOVR_XML_EXEC_TESTS_CMD
+        ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
+    )
+    # Running gcovr
+    set(GCOVR_XML_CMD
+        ${GCOVR_PATH} --xml ${Coverage_NAME}.xml -r ${BASEDIR} ${GCOVR_ADDITIONAL_ARGS}
+        ${GCOVR_EXCLUDE_ARGS} --object-directory=${PROJECT_BINARY_DIR}
+    )
+    
+    if(CODE_COVERAGE_VERBOSE)
+        message(STATUS "Executed command report")
+
+        message(STATUS "Command to run tests: ")
+        string(REPLACE ";" " " GCOVR_XML_EXEC_TESTS_CMD_SPACED "${GCOVR_XML_EXEC_TESTS_CMD}")
+        message(STATUS "${GCOVR_XML_EXEC_TESTS_CMD_SPACED}")
+
+        message(STATUS "Command to generate gcovr XML coverage data: ")
+        string(REPLACE ";" " " GCOVR_XML_CMD_SPACED "${GCOVR_XML_CMD}")
+        message(STATUS "${GCOVR_XML_CMD_SPACED}")
+    endif()
+
+    add_custom_target(${Coverage_NAME}
+        COMMAND ${GCOVR_XML_EXEC_TESTS_CMD}
+        COMMAND ${GCOVR_XML_CMD}
+        
+        BYPRODUCTS ${Coverage_NAME}.xml
+        WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+        DEPENDS ${Coverage_DEPENDENCIES}
+        VERBATIM # Protect arguments to commands
+        COMMENT "Running gcovr to produce Cobertura code coverage report."
+    )
+
+    # Show info where to find the report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ;
+        COMMENT "Cobertura code coverage report saved in ${Coverage_NAME}.xml."
+    )
+endfunction() # setup_target_for_coverage_gcovr_xml
+
+# Defines a target for running and collection code coverage information
+# Builds dependencies, runs the given executable and outputs reports.
+# NOTE! The executable should always have a ZERO as exit code otherwise
+# the coverage generation will not complete.
+#
+# setup_target_for_coverage_gcovr_html(
+#     NAME ctest_coverage                    # New target name
+#     EXECUTABLE ctest -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
+#     DEPENDENCIES executable_target         # Dependencies to build first
+#     BASE_DIRECTORY "../"                   # Base directory for report
+#                                            #  (defaults to PROJECT_SOURCE_DIR)
+#     EXCLUDE "src/dir1/*" "src/dir2/*"      # Patterns to exclude (can be relative
+#                                            #  to BASE_DIRECTORY, with CMake 3.4+)
+# )
+# The user can set the variable GCOVR_ADDITIONAL_ARGS to supply additional flags to the
+# GCVOR command.
+function(setup_target_for_coverage_gcovr_html)
+
+    set(options NONE)
+    set(oneValueArgs BASE_DIRECTORY NAME)
+    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES)
+    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+    if(NOT GCOVR_PATH)
+        message(FATAL_ERROR "gcovr not found! Aborting...")
+    endif() # NOT GCOVR_PATH
+
+    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
+    if(DEFINED Coverage_BASE_DIRECTORY)
+        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
+    else()
+        set(BASEDIR ${PROJECT_SOURCE_DIR})
+    endif()
+
+    # Collect excludes (CMake 3.4+: Also compute absolute paths)
+    set(GCOVR_EXCLUDES "")
+    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_GCOVR_EXCLUDES})
+        if(CMAKE_VERSION VERSION_GREATER 3.4)
+            get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
+        endif()
+        list(APPEND GCOVR_EXCLUDES "${EXCLUDE}")
+    endforeach()
+    list(REMOVE_DUPLICATES GCOVR_EXCLUDES)
+
+    # Combine excludes to several -e arguments
+    set(GCOVR_EXCLUDE_ARGS "")
+    foreach(EXCLUDE ${GCOVR_EXCLUDES})
+        list(APPEND GCOVR_EXCLUDE_ARGS "-e")
+        list(APPEND GCOVR_EXCLUDE_ARGS "${EXCLUDE}")
+    endforeach()
+
+    # Set up commands which will be run to generate coverage data
+    # Run tests
+    set(GCOVR_HTML_EXEC_TESTS_CMD
+        ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
+    )
+    # Create folder
+    set(GCOVR_HTML_FOLDER_CMD
+        ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/${Coverage_NAME}
+    )
+    # Running gcovr
+    set(GCOVR_HTML_CMD
+        ${GCOVR_PATH} --html ${Coverage_NAME}/index.html --html-details -r ${BASEDIR} ${GCOVR_ADDITIONAL_ARGS}
+        ${GCOVR_EXCLUDE_ARGS} --object-directory=${PROJECT_BINARY_DIR}
+    )
+
+    if(CODE_COVERAGE_VERBOSE)
+        message(STATUS "Executed command report")
+
+        message(STATUS "Command to run tests: ")
+        string(REPLACE ";" " " GCOVR_HTML_EXEC_TESTS_CMD_SPACED "${GCOVR_HTML_EXEC_TESTS_CMD}")
+        message(STATUS "${GCOVR_HTML_EXEC_TESTS_CMD_SPACED}")
+
+        message(STATUS "Command to create a folder: ")
+        string(REPLACE ";" " " GCOVR_HTML_FOLDER_CMD_SPACED "${GCOVR_HTML_FOLDER_CMD}")
+        message(STATUS "${GCOVR_HTML_FOLDER_CMD_SPACED}")
+
+        message(STATUS "Command to generate gcovr HTML coverage data: ")
+        string(REPLACE ";" " " GCOVR_HTML_CMD_SPACED "${GCOVR_HTML_CMD}")
+        message(STATUS "${GCOVR_HTML_CMD_SPACED}")
+    endif()
+
+    add_custom_target(${Coverage_NAME}
+        COMMAND ${GCOVR_HTML_EXEC_TESTS_CMD}
+        COMMAND ${GCOVR_HTML_FOLDER_CMD}
+        COMMAND ${GCOVR_HTML_CMD}
+
+        BYPRODUCTS ${PROJECT_BINARY_DIR}/${Coverage_NAME}/index.html  # report directory
+        WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+        DEPENDS ${Coverage_DEPENDENCIES}
+        VERBATIM # Protect arguments to commands
+        COMMENT "Running gcovr to produce HTML code coverage report."
+    )
+
+    # Show info where to find the report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ;
+        COMMENT "Open ./${Coverage_NAME}/index.html in your browser to view the coverage report."
+    )
+
+endfunction() # setup_target_for_coverage_gcovr_html
+
+# Defines a target for running and collection code coverage information
+# Builds dependencies, runs the given executable and outputs reports.
+# NOTE! The executable should always have a ZERO as exit code otherwise
+# the coverage generation will not complete.
+#
+# setup_target_for_coverage_fastcov(
+#     NAME testrunner_coverage                    # New target name
+#     EXECUTABLE testrunner -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
+#     DEPENDENCIES testrunner                     # Dependencies to build first
+#     BASE_DIRECTORY "../"                        # Base directory for report
+#                                                 #  (defaults to PROJECT_SOURCE_DIR)
+#     EXCLUDE "src/dir1/" "src/dir2/"             # Patterns to exclude.
+#     NO_DEMANGLE                                 # Don't demangle C++ symbols
+#                                                 #  even if c++filt is found
+#     SKIP_HTML                                   # Don't create html report
+#     POST_CMD perl -i -pe s!${PROJECT_SOURCE_DIR}/!!g ctest_coverage.json  # E.g. for stripping source dir from file paths
+# )
+function(setup_target_for_coverage_fastcov)
+
+    set(options NO_DEMANGLE SKIP_HTML)
+    set(oneValueArgs BASE_DIRECTORY NAME)
+    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES FASTCOV_ARGS GENHTML_ARGS POST_CMD)
+    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+    if(NOT FASTCOV_PATH)
+        message(FATAL_ERROR "fastcov not found! Aborting...")
+    endif()
+
+    if(NOT Coverage_SKIP_HTML AND NOT GENHTML_PATH)
+        message(FATAL_ERROR "genhtml not found! Aborting...")
+    endif()
+
+    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
+    if(Coverage_BASE_DIRECTORY)
+        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
+    else()
+        set(BASEDIR ${PROJECT_SOURCE_DIR})
+    endif()
+
+    # Collect excludes (Patterns, not paths, for fastcov)
+    set(FASTCOV_EXCLUDES "")
+    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_FASTCOV_EXCLUDES})
+        list(APPEND FASTCOV_EXCLUDES "${EXCLUDE}")
+    endforeach()
+    list(REMOVE_DUPLICATES FASTCOV_EXCLUDES)
+
+    # Conditional arguments
+    if(CPPFILT_PATH AND NOT ${Coverage_NO_DEMANGLE})
+        set(GENHTML_EXTRA_ARGS "--demangle-cpp")
+    endif()
+
+    # Set up commands which will be run to generate coverage data
+    set(FASTCOV_EXEC_TESTS_CMD ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS})
+
+    set(FASTCOV_CAPTURE_CMD ${FASTCOV_PATH} ${Coverage_FASTCOV_ARGS} --gcov ${GCOV_PATH}
+        --search-directory ${BASEDIR}
+        --process-gcno
+        --output ${Coverage_NAME}.json
+        --exclude ${FASTCOV_EXCLUDES}
+        --exclude ${FASTCOV_EXCLUDES}
+    )
+    
+    set(FASTCOV_CONVERT_CMD ${FASTCOV_PATH}
+        -C ${Coverage_NAME}.json --lcov --output ${Coverage_NAME}.info
+    )
+
+    if(Coverage_SKIP_HTML)
+        set(FASTCOV_HTML_CMD ";")
+    else()
+        set(FASTCOV_HTML_CMD ${GENHTML_PATH} ${GENHTML_EXTRA_ARGS} ${Coverage_GENHTML_ARGS}
+            -o ${Coverage_NAME} ${Coverage_NAME}.info
+        )
+    endif()
+
+    set(FASTCOV_POST_CMD ";")
+    if(Coverage_POST_CMD)
+        set(FASTCOV_POST_CMD ${Coverage_POST_CMD})
+    endif()
+
+    if(CODE_COVERAGE_VERBOSE)
+        message(STATUS "Code coverage commands for target ${Coverage_NAME} (fastcov):")
+
+        message("   Running tests:")
+        string(REPLACE ";" " " FASTCOV_EXEC_TESTS_CMD_SPACED "${FASTCOV_EXEC_TESTS_CMD}")
+        message("     ${FASTCOV_EXEC_TESTS_CMD_SPACED}")
+
+        message("   Capturing fastcov counters and generating report:")
+        string(REPLACE ";" " " FASTCOV_CAPTURE_CMD_SPACED "${FASTCOV_CAPTURE_CMD}")
+        message("     ${FASTCOV_CAPTURE_CMD_SPACED}")
+
+        message("   Converting fastcov .json to lcov .info:")
+        string(REPLACE ";" " " FASTCOV_CONVERT_CMD_SPACED "${FASTCOV_CONVERT_CMD}")
+        message("     ${FASTCOV_CONVERT_CMD_SPACED}")
+
+        if(NOT Coverage_SKIP_HTML)
+            message("   Generating HTML report: ")
+            string(REPLACE ";" " " FASTCOV_HTML_CMD_SPACED "${FASTCOV_HTML_CMD}")
+            message("     ${FASTCOV_HTML_CMD_SPACED}")
+        endif()
+        if(Coverage_POST_CMD)
+            message("   Running post command: ")
+            string(REPLACE ";" " " FASTCOV_POST_CMD_SPACED "${FASTCOV_POST_CMD}")
+            message("     ${FASTCOV_POST_CMD_SPACED}")
+        endif()
+    endif()
+
+    # Setup target
+    add_custom_target(${Coverage_NAME}
+
+        # Cleanup fastcov
+        COMMAND ${FASTCOV_PATH} ${Coverage_FASTCOV_ARGS} --gcov ${GCOV_PATH}
+            --search-directory ${BASEDIR}
+            --zerocounters
+
+        COMMAND ${FASTCOV_EXEC_TESTS_CMD}
+        COMMAND ${FASTCOV_CAPTURE_CMD}
+        COMMAND ${FASTCOV_CONVERT_CMD}
+        COMMAND ${FASTCOV_HTML_CMD}
+        COMMAND ${FASTCOV_POST_CMD}
+
+        # Set output files as GENERATED (will be removed on 'make clean')
+        BYPRODUCTS
+             ${Coverage_NAME}.info
+             ${Coverage_NAME}.json
+             ${Coverage_NAME}/index.html  # report directory
+
+        WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+        DEPENDS ${Coverage_DEPENDENCIES}
+        VERBATIM # Protect arguments to commands
+        COMMENT "Resetting code coverage counters to zero. Processing code coverage counters and generating report."
+    )
+
+    set(INFO_MSG "fastcov code coverage info report saved in ${Coverage_NAME}.info and ${Coverage_NAME}.json.")
+    if(NOT Coverage_SKIP_HTML)
+        string(APPEND INFO_MSG " Open ${PROJECT_BINARY_DIR}/${Coverage_NAME}/index.html in your browser to view the coverage report.")
+    endif()
+    # Show where to find the fastcov info report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ${CMAKE_COMMAND} -E echo ${INFO_MSG}
+    )
+
+endfunction() # setup_target_for_coverage_fastcov
+
+function(append_coverage_compiler_flags)
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
+    set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
+    message(STATUS "Appending code coverage compiler flags: ${COVERAGE_COMPILER_FLAGS}")
+endfunction() # append_coverage_compiler_flags
+
+# Setup coverage for specific library
+function(append_coverage_compiler_flags_to_target name)
+    target_compile_options(${name}
+        PRIVATE ${COVERAGE_COMPILER_FLAGS})
+endfunction()